The DEWALT DPN1664PP Pneumatic 16 Gauge Finish Nailer is fitted with a Precision Point™ nose that has a unique contact detect system for reduced marking of work surface. 80% nose tip reduction for improved accuracy and visibility.

The selectable trigger system provides sequential or contact operation with an easy depth adjust control for precise countersinking of nails. Also fitted with a tool-free jam release mechanism for easy nail removal.

Suitable for the following applications: tongue & groove, panelling, cabinet work, door & window sets, skirting and dado rails, staircases and rails.

Specification

Magazine Capacity: 110 Nails.
Operating Pressure: 4.8-8.3 Bar.
Nail Length: 25-64mm.
Nail Head Diameter: 1.6 x 2.8mm.
Trigger Type: Sequential & Bump.
Air Consumption Per Actuation: 1.27 Litre.
Length: 302mm.
Height: 289mm.
Width: 86mm.
Weight: 1.7kg.

The DEWALT DPN1850PP Pneumatic Oil-Free 18 Gauge Brad Nailer is fitted with a Precision Point™ nose. That has a unique contact detect system for reduced marking of the work surface. 80% nose tip reduction for improved accuracy and visibility.

The selectable trigger system provides sequential or contact operation with an easy depth adjust control for precise countersinking of nails. Also fitted with a tool-free jam release mechanism for easy nail removal.

Suitable for the following applications: beading & trim, tongue & groove, panelling and cabinet work.

Specification

Magazine Capacity: 100 Nails.
Operating Pressure: 4.8-8.3 Bar.
Nail Length: 15-50mm.
Nail Head Diameter: Crown2.
Trigger Type: Sequential & Bump.
Air Consumption Per Actuation: 0.8 Litre.
Length: 235mm.
Height: 240mm.
Width: 70mm.
Weight: 1.24kg.

The Bostitch SX1838-E stapler has user-friendly features such as dial-a-depth for quick countersinking adjustments and a selectable trigger system. It will make light work of construction stapling applications.

This rugged tool drives staples from 15 to 38 mm length and offers extreme reliability and durability, yet with low maintenance due to the oil free design.

Comes complete with carry case.

Specification

Magazine Capacity: 100 (max).
Fires: SX Series: 12-38mm and Crowns: 5.6mm.
Operating Pressure: 70-120 PSI, 4.8-8.3 Bar.
Dimensions (LxWxH): 235 × 240 × 70mm.
Weight: 1.34kg.

The Bostitch TU-216-2330K-E Pneumatic Headless Pinner is a compact 23 gauge headless pinner which is specially designed for fine detail work in the construction industry and industrial use. Benefits include a secondary safety trigger to reduce the risk of accidental start, auto adjusting magazine for varying pin lengths together with a rear exhaust to direct air away from the nose piece.

Specification

Magazine Capacity: 200 (max.)
Nail Range: 15-30mm
Nail Diameter: 0.6mm
Operating Pressure: 70-100 PSI, 4.8-7 bar
Dimensions (LxWxH): 230 x 198 x 40mm
Weight: 0.984kg

Bahco BP218 Air Blow Gun has a brass inlet and meets the OSHA requirements. It has a 1/4in connector.

Specification
Air Inlet BSP: 1/4in.
Output pressure: 2.07bar.
Working pressure: 6.3bar.
Fluid delivery: 190-250 ml/min.
Airflow: 158 l/min.
Maximum Air pressure input: 11 bar.
Length: 210mm.
Weight: 0.15kg.

Sound pressure level: 80 dBA.

The Bahco BP825 Reversible Air Drill has a composit housing and rubber grip handle for optimal user comfort. It also comes with a removable, adjustable second handle.

The forward/reverse lever allows for a quick and easy change of direction. An air exhaust in the handle allows for a clean and pleasent operation. Whilst the quick chuck allows for quick bit changes.

Specification

Power: 220 W.
Air inlet BSP: 1/4in.
Bar: 6.3.
Chuck Size: 13mm.
No Load Speed: 450/min.
Air Consumption: 105l/min.
Recommended Hose Size: 10mm.
Weight: 1.53kg.

Sound pressure level: 88 dBA.
Vibration level: 2.5m/s.

The Einhell 5 Piece Air Tool Set contains:

1 x Tyre Inflator with Pressure Gauge
1 x Blow Out Gun
1 x Spiral Air Hose with Quick Coupling
1 x Oil Spray Gun with Suction Cup
1 x Paint Spray Gun with Gravity Cup

DEWALT DPC10QTC Mid Pressure Super Quiet Compressor 1100 Watt 240 Volt Version.

The Bahco Impact Wrench has a durable insulated composite housing with a twin hammer mechanism and a three-step power regulator. Its 360º swivel connection helps avoid hose coiling. Supplied in a robust plastic case with a foam inlay that fits into the Bahco T-module system T12.

Contains:

1 x BP815 1/2in Impact Wrench
1 x 1/4in Threaded Male Connector
11 x Impact Sockets: 10, 11, 12, 13, 14, 15, 17, 19, 21, 22, and 24mm

Specification

Air Inlet BSP: 1/4in.
Square Drive: 1/2 Inch.
Minimum Hose Diameter: 10mm.
Working pressure: 6.3bar.
No Load Speed: 7,000/min..
Impacts Per Minute: 1,150/bpm.
Torque Range: 320-620Nm.
Max. Torque (Reverse): 825Nm.
Air Consumption: 130 l/min.
Vibration Level: 5 mm/s-².
Hose Length: 10m.
Length: 192mm.
Weight: 1.95kg.