×

:

Not a valid Time
This is a required field.

Milwaukee, DeWalt, Einhell, Black and Decker power tool kits are just some of the top brands we stock, shop our range of cordless tool kits with low prices and next day delivery available.

Page
per page

Items 1-10 of 15

Set Descending Direction
  1. DEWALT DCK2033X2 FLEXVOLT XR TWIN PACK 18/54V 2 X 9.0/3.0AH LI-ION

    £1,724.00 Per Each

    The DEWALT DCK2033X2 XR FlexVolt Brushless Twin Pack, contains the following:

    1 x 54V DCH333 XR FlexVolt Brushless SDS Plus Hammer has a brushless motor for extreme run time and reduced maintenance. Compact, lightweight and ergonomic design for improved comfort and support during extended operating periods. With rotation stop mode for light chiselling in plaster, tiles and render, and impact stop mode for rotary only drilling in wood and metal.

    Modes: Rotary, SDS Hammer, Chisel Only
    No Load Speed: 0-1,000/min.
    Impact Rate: 0-4,480/min. with 3.5 joules
    Capacity: Concrete 30mm, Steel 13mm, Wood 26mm
    Weight 3.7kg

    1 x 18V DCD996 XR Brushless Combi Drill with a tough 3-speed all-metal transmission for increased run time and a longer tool life. Electronic Clutch with 11-position adjustable torque control for optimised precision when screwdriving. It also has an improved 3-position LED torch with high/medium/low settings.

    Chuck: 13mm Keyless
    No Load Speed: 0-450/0-1,300/0-2,000/min.
    Impact Rate: 0-8,600/0-25,500/0-38,250/bpm
    Max. Torque: 95Nm, 11 Settings
    Capacity: Wood 55mm, Steel 15mm, Masonry 16mm
    Weight: 2.1kg

    1 x 18-54V DCB118 XR FlexVolt Fast Charger will charge 54V FlexVolt and 18V XR batteries. A bright LED indicator communicates battery charge status: charged, charging, power problem and battery too hot or too cold conditions. It has a compact design that is wall mountable and is fan cooled so it can charge efficiently between 4°C and 40°C.

    Also supplied with: 2 x 18/54V 9.0/3.0Ah FlexVolt Li-ion Batteries and 1 x TSTAK VI.

    Delivery: UNABLE TO PROVIDE ETA
  2. DEWALT DCK266P2T XR BRUSHLESS TWIN PACK 18V 2 X 5.0AH LI-ION

    £738.00 Per Each

    The DEWALT DCK266P2T Twin Pack, contains the following:

    1 x 18V DCD796 XR Brushless Compact Combi Drill has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving.

    Chuck: 13mm
    No Load Speed: 0-550/0-2,000/min.
    Impact Rate: 0-9,350/0-34,000/min.
    Max Torque: 70Nm
    Capacity: Wood 40mm, Steel 13mm, Masonry 13mm

    1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.

    Bit Holder: 6.35mm (1/4in)
    No Load Speed: 0-850/0-2,100/0-3,000/min.
    Impact Rate: 0-1,800/0-2,900/0-3,700/bpm
    Max Torque: 26/80/203Nm
    Weight: 1.56kg

    1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes.

    Voltage: 10.8/14.4/18V.
    Battery Chemistry: Li-ion
    Charging Current: 4.0 A

    Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x TSTAK­™ II Toolbox.

    Delivery: ETA FOR DELIVERY 3 - 5 DAYS
  3. DEWALT DCK276P2 BRUSHLESS TWIN PACK 18V 2 X 5.0AH LI-ION

    £958.00 Per Each

    The DEWALT DCK276P2 Brushless Twin Pack, contains the following:

    1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings.

    Chuck: 13mm Keyless.
    No Load Speed: 0-450/0-1,300/0-2,000/min.
    Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.
    Max Torque: 95Nm, 11 Settings.
    Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mm
    Weight: 2.1kg.

    1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.

    Bit Holder: 6.35mm (1/4in).
    No Load Speed: 0-850/0-2,100/0-3,000/min.
    Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.
    Max Torque: 26/80/203Nm.
    Weight: 1.56kg.

    1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries.

    Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS150 TOUGHSYSTEM™ Toolbox.

    Delivery: UNABLE TO PROVIDE ETA
  4. DCK276T2T FLEXVOLT XR TWIN PACK 18V 2 X 18/54V 6.0/2.0AH LI-ION

    £904.00

    The DEWALT DCK276T2T FlexVolt Twin Pack, contains the following:

    1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings.

    Chuck: 13mm Keyless. ;
    No Load Speed: 0-450/0-1,300/0-2,000/Min.
    Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.
    Max Torque: 95Nm, 11 Settings.
    Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mm
    Weight: 2.1kg.

    1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.

    Bit Holder: 6.35mm (1/4in).
    No Load Speed: 0-850/0-2,100/0-3,000/Min.
    Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.
    Max Torque: 26/80/203Nm.
    Weight: 1.56kg.

    1 x 18-54V DCB116 FlexVolt XR Fast Charger that will charge 54V FlexVolt and 18V XR batteries. A bright LED indicator communicates battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It has a compact design that is wall mountable and fan cooled so it can charge efficiently between 4°C and 40°C.

    Also supplied with: 2 x 18/54V 6.0/2.0Ah FlexVolt Li-ion Batteries, 2 x Belt Hooks, 1 x Side Handle for Combi Drill and 1 x DWST1-71195 TSTAK™ Deep Toolbox.

    Delivery: ETA FOR DELIVERY 3 - 5 DAYS
  5. DEWALT DCK278P2 XR TWIN PACK 18V 2 X 5.0AH LI-ION

    £758.00 Per Each

    The DEWALT DCK278P2 XR Twin Pack, contains the following:

    1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings.

    Chuck: 13mm Keyless.
    No Load Speed: 0-450/0-1,300/0-2,000/min.
    Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.
    Max Torque: 95Nm, 11 Settings.
    Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mm
    Weight: 2.1kg.

    1 x 18V DCG412 XR Premium Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster.

    No Load Speed: 7,000/min.
    Disc Diameter: 125mm, M14 Spindle.
    Weight: 3.0kg.

    1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries.

    Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS300 TOUGHSYSTEM™ Toolbox.

    Delivery: ETA FOR DELIVERY 3 - 5 DAYS
  6. DEWALT DCK305P2T XR BRUSHLESS TRIPLE KIT 18V 2 X 5.0AH LI-ION

    £1,154.00 Per Each

    The DEWALT DCK305P2T XR Brushless Triple Kit, contains the following:

    1 x 18V DCH273P2 XR Brushless 3 Mode Hammer, fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete.

    Modes: Rotary, SDS Hammer, Chisel Only
    No Load Speed: 0-1,100/min.
    Impact Rate: 0-4,600/bpm with 2.1 joules
    Capacity: Wood 26mm, Metal 13mm, Masonry 24mm
    Weight: 3.1kg

    1 x 18V DCF887 XR Brushless Impact Driver, equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.

    Bit Holder: 6.35mm (1/4in)
    No Load Speed: 0-1,000/0-2,800/0-3,250/min.
    Impact Rate: 0-1,800/0-2,900/0-3,800/bpm
    Max. Torque: 26/80/205Nm
    Weight: 1.56kg

    1 x 18V DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall. The 2 position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released.

    No Load Speed: 9,000/min.
    Disc Diameter: 125mm, M14 Spindle
    Weight: 1.75kg

    Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Multi-Voltage Charger, 1 x TSTAK™ II and 1 x TSTAK™ VI Deep Toolbox.

    Delivery: UNABLE TO PROVIDE ETA
  7. DEWALT DCK368P3T XR BRUSHLESS 3 PIECE KIT 18V 3 X 18V 5.0AH LI-ION

    £1,656.82 Per Each

    The DEWALT DCK368P3T XR Brushless 3 Piece Kit, contains the following:

    1 x 18V DCD796 XR Brushless Compact Combi Drill which has an ultra compact, lightweight design. The two speed all metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving.

    Chuck: 13mm Keyless
    No Load Speed: 0-550/0-2,000/min.
    Impact Rate: 0-9,350/34,000/bpm
    Max Torque: 27/70Nm, 15 Settings
    Capacity: Steel 13mm, Masonry 13mm, Wood 40mm
    Weight: 1.3kg

    1 x 18V DCF887 XR Brushless Impact Driver that is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.

    Bit Holder: 6.35mm (1/4in)
    No Load Speed: 0-850/0-2,100/0-3,000/min.
    Impact Rate: 0-1,800/0-2,900/0-3,700/bpm
    Max Torque: 26/80/203Nm
    Weight: 1.56kg

    1 x 18V DCH273 Brushless XR 3 Mode SDS Hammer fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete.

    Modes: Rotary, SDS Hammer, Chisel Only
    No Load Speed: 0-1,100/min.
    Impact Rate: 0-4,600/bpm
    Impact Energy: 2.1 joules
    Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mm
    Weight: 3.1kg

    1 x 10.8-18V DCB115 XR Multi-Voltage Charger which has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes.

    Also supplied with 3 x 18V 5.0Ah Li-ion Batteries and 2 x TSTAK­™ II Toolboxes.

    Delivery: UNABLE TO PROVIDE ETA
  8. EINHELL TE-TK 18 LI DRILL & GRINDER KIT 18V 1 X 1.5AH & 1 X 3.0AH LI-ION

    £298.80 Per Each

    The Einhell TE-TK 18 Li Drill & Grinder Kit, contains the following:

    1 x 18V TE-CD 18 Li Power X-Change Drill Driver has 2 functions: screwdriving and drilling. With 2 speed gearing for powerful screwdriving and fast drilling. Fitted with a high-quality, 13mm quick-change drill chuck and an LED lamp to illuminate the work area. Integrated quick-stop function for increased safety.

    Chuck: 13mm Single Sleeve
    No Load Speed: 0-350/0-1,250/min.
    Max. Torque: 44Nm, 20 Settings
    Capacity: Concrete: 8mm

    1 x 18V TE-AG 18 Li Power X-Change Angle Grinder is a very handy, compact tool and is the lightest angle grinder of its class. It has a robust aluminium gear housing and a very smooth operation thanks to the separation of motor and gearing. The modified air guidance provides better cooling and the disc guard has a quick adjust facility. The slimline design has been fitted with ergonomic soft grip surfaces and the additional handle can be fitted flexibly in 3 positions.

    No Load Speed: 8,500/min.
    Disc Diameter: 115mm
    Max. Cutting Depth: 28mm
    Weight: 1.21kg

    Also supplied with: 1 x 18V 1.5Ah Li-ion Battery, 1 x 18V 3.0Ah Li-ion Battery and 1 x 18V Power X-Charger System Fast Charger.

    Delivery: UNABLE TO PROVIDE ETA
  9. DEWALT DCK2110L2 XR BRUSHLESS SUB-COMPACT TWIN PACK 12V 2 X 3.0AH LI-ION

    £340.00 Per Each

    The DEWALT DCK2110L2 XR Brushless Sub-Compact Twin Pack, contains the following:

    1 x 12V DCD701 XR Brushless Sub-Compact Drill Driver has a lightweight design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. Compatible with your existing 10.8V batteries and tools.

    Chuck: 10mm Keyless
    No Load Speed: 0-425/0-1,500/min.
    Max. Torque: 57.5Nm, 15 Settings
    Capacity: Wood 20mm
    Weight: 0.9kg

    1 x 12V DCF801 XR Brushless Sub-Compact Impact Driver with 3 electronic speeds for greater control when working on precise applications. Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged. Compatible with your existing 10.8V batteries and tools.

    No Load Speed: 0-950/0-1,950/0-2,850/min.
    Impact Rate: 0-3,600/bpm
    Max. Torque: 163Nm
    Bare Unit Weight: 0.8kg

    Also supplied with: 2 x 12V 3.0Ah Li-ion Batteries, 1 x 10.8-18V DCB112 XR Multi-Voltage Li-ion Charger and 1 x TSTAK II Kit Box

    Delivery: ETA FOR DELIVERY 3 - 5 DAYS
  10. DEWALT DCK2111L2T XR BRUSHLESS SUB-COMPACT TWIN PACK 12V 2 X 3.0AH LI-ION

    £336.00 Per Each

    The DEWALT DCK2111L2T XR Brushless Sub-Compact Twin Pack, contains the following:

    1 x 12V DCD706 XR Sub-Compact Combi Drill with an efficient brushless motor that gives 15% more runtime than previous generation. It is 38.5mm shorter than previous generation, allowing you to get into even smaller spaces. 15 Position adjustable torque control for consistent screw driving into a variety of materials.

    Chuck: 10mm Keyless
    No Load Speed: 0-425/0-1,500/min.
    Impact Rate: 25,500/bpm
    Max. Torque: 57.5Nm, 15 Settings
    Capacity: Steel 10mm, Masonry 10mm, Wood 20mm
    Weight: 1.2kg

    1 x 12V DCF801 XR Brushless Sub-Compact Impact Driver is fitted with an efficient brushless motor that gives 15% more runtime than previous generation. With 3 electronic speeds allowing for greater control when working on precise applications. The Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged.The 'Drop and Load' bit holder allows for efficient one-handed operation.

    No Load Speed: 0-950/0-1,950/0-2,850/min.
    Impact Rate: 0-3,600/bpm
    Max. Torque: 163Nm
    Bare Unit Weight: 0.8kg

    Also supplied with: 2 x 12V 3.0Ah Li-ion Batteries, 1 x Multi-Voltage XR Charger & 1 x TSTAK Kit Box

    Delivery: UNABLE TO PROVIDE ETA
Page
per page

Items 1-10 of 15

Set Descending Direction