2 x Monument MLK24 Manhole Cover Lift Keys 609mm (24in)

The Monument 1010 are manufactured from a single piece of malleable iron for greater durability and strength, with a tee handle for greater torque and added leverage, and a D-shaped end that fits snug in to most manhole covers for easy and secured lifting.

Designed to make the removal of manhole covers an easier operation. Made with a 100mm (4in) handle and a 125mm (5in) shaft.

Pack Quantity: 2

The Monument 1012R Side Entry Manhole Keys have been designed for lifting light duty (pressed steel) manhole covers. These keys are made from 10mm steel bar and the simple 90 degree bent ends allow these keys to be used in a large number of different manhole types.

Pack Quantity: 2

This Monument 1517A Screwdriver has a long reach phillips blade with magnetic tip, making it suitable for mounting screws at the rear of boilers.

This Monument 1518D Screwdriver has a long reach slotted blade with magnetic tip, making it suitable for fixing boilers and toilet pans.

This Monument Radiator Stepped Wrench & Ratchet handle is suitable for use on most radiator valves, nipples, plugs, tank connectors etc. It has the following step sizes 10, 12, 12.7, 17 & 22mm.

The Monument 2050L Gas Meter & Radiator Bleed Key is used for releasing air which can appear in a radiator, and for opening gas meter cupboards.
Made in Britain from engineering plastic.

Monument Radiator Spanners Twin Pack with 1 x 10mm and 1 x 12mm square section radiator spanners. Suitable for vent plugs and bleed screws. They are made from zinc plated steel with a slightly offset handle for ease of use.

This Monument Universal Radiator & Valve Key has tapered ends and are therefore self-restricting. The three profiles make the tool universal, catering for 3/8 in and 10 mm square section radiator vent plugs and bleed screws.
Bayonet or internal lug type radiator valves allow for variations in size, shape, and position. The 12 mm to 14 mm internal hexagon valves are tapered allowing for variations in size.

This Monument Steel Radiator Spanner is used on 3/8 in and 10 mm square section radiator vent plugs and bleed screws.
It has a Zinc plated finish with a slightly offset handle.