Shop By
Shopping Options
-
TREND C116 X 1/2 TCT 90 BEARING GUIDED TRIMMER CUTTER 12.7 X 25.4MM
£25.62Per 1Pack Qty: 1THIS TREND TCT 90° BEARING GUIDED TRIMMER CUTTER HAS THE FOLLOWING SPECIFCATION: CUT DIAMETER: 12.7MMCUTTING DEPTH: 25.4MMSHANK: 1/2IN -
TREND 46/95 X 1/4 TCT 90 SHANK MOUNTED TEMPLATE PROFILER 12.7 X 25.4MM
£48.84Per 1Pack Qty: 1A 3 MM APPROXIMATE OVERLAP SHOULD BE LEFT BEFORE COPY PROFILING, ALSO WHEN USING PLASTIC LAMINATE ALWAYS ALLOW LAMINATE ADHESIVE TO DRY BEFORE TRIMMING. THIS AVOIDS CLOGGING THE GUIDE BEARING.TOOLING TUNGSTEN CARBIDE
1/4 IN SHANK.ANGLE A = 90
D = 12.7 MM
C = 25.4 MM -
TREND 46/37 X 1/2 TCT BEARING GUIDED CHAMFER 45 31.8 X 12MM
£82.22Per 1Pack Qty: 1T.C.T.1/2IN SHANK.A = 45° C1 = 12 MMC2 = 16 MMD = 31.8 MMB = 9.5 MM -
TREND 46/23 X 1/2 TCT 90 TEMPLATE PROFILER 12.7 X 50MM
£101.14Per 1Pack Qty: 1ANGLE A = 90
D = 12.7 MM
C = 50 MM -
TREND 46/22 X 1/2 TCT 90 TEMPLATE PROFILER 18.2 X 50MM
£101.14Per 1Pack Qty: 1ANGLE A = 90
D = 18.2 MM
C = 50 MM -
TREND 46/07 X 1/4 TCT 90 TEMPLATE PROFILER 6.3 X 25.4MM
£34.22Per 1Pack Qty: 1TOOLING TUNGSTEN CARBIDE
1/4IN SHANK.ANGLE A = 90
D = 6.3 MM
C = 25.4 MM -
TREND C022 X 1/4 TCT TWO FLUTE CUTTER 12.7 X 31.8MM
£23.58Per 1Pack Qty: 1D - DIAMETER - 1/2IN 12.7MM
C - CUTTING LENGTH - 1 1/4 31.8MM
T.C.T.
2 FLUTES. -
TREND C016 X 1/4 TCT TWO FLUTE CUTTER 10.0 X 19.1MM
£20.48Per 1Pack Qty: 1D - DIAMETER - 10MM
C - CUTTING LENGTH - 19.1MM
T.C.T. -
TREND C015 X 1/4 TCT TWO FLUTE CUTTER 9.5 X 31.8MM
£19.96Per 1Pack Qty: 1D - DIAMETER - 25/64 IN 10.0MM
C - CUTTING LENGTH - 3/4IN 19.1MM
T.C.T.
2 FLUTES. -
TREND C013 X 1/4 TCT TWO FLUTE CUTTER 9.5 X 19.1MM
£17.20Per 1Pack Qty: 1D - DIAMETER - 3/8 IN 9.5MM
C - CUTTING LENGTH - 1 1/4IN 31.8MM
T.C.T.
2 FLUTES.
