Adjustable Plasterer's Square with millimetre and degree graduations that can be set in four fixed positions (22.5°, 45°, 67.5° and 90°). It also has an additional 21 angles marked on its scale.

The stock and blade are made from anodized aluminium and can be folded together, making it easy to store and transport. It can also be switched between right and left position.

Blade Length: 1200mm (47.1/4in)
Weight: 1150g.

The Hultrafors Quattro Adjustable Try Square has a millimetre scale which can be set at three positions (45°, 90° and 135°) and has a tolerance ± 0.06°. It can also be folded making it easy to store and carry.
The stock is made of anodised aluminium, the blade is 25cm long x 45mm wide and made of stainless steel, with the scale being deep-etched and extremely hard-wearing.

Specification:

Size: 250mm.

The IRWIN Marples M2200 Try Square has a sealed hardwood stock faced with brass for extra protection against damage and to give longer life and better accuracy. Bevelled squares are perfect for marking out lines, testing squares and angle lengths.

All Marples measuring tools are made from an aluminium block and with a hardened steel blade which is secured by three steel rivets with brass washers, preventing movement.

The scales are etched on the surface which ensures long durability. The tools are manufactured according to a very fine tolerances, so all measuring tools are very precise. Also features an edge holder for accurate positioning.

Size 150mm (6 in).

The Hultafors Adjustable Plasterer's Square has millimetre and degree graduations that can be set in 4 fixed positions (22.5°, 45°, 67.5°, 90°). There is an additional 21 angles marked on the scale. The stock and blade are made from anodized aluminium. They can be folded together, making it easy to store and transport, and also be switched between right and left position.

Specification:

Blade Length: 900mm (35.1/2in).

This Hultafors Mitre Square automatically produces the correct angle when cutting mitres without having to perform any calculations. When the tool is turned to the desired angle, the indicator flag divides the angle by two.
The guide is made from fibreglass-reinforced nylon, with an indicator flag of electrogalvanized metal, and can be used for both internal and external angles.

Specification:

SIze: 150mm.

This Hultafors Try Square with fibreglass-reinforced ABS plastic stock and millimetre graduations on the upper and lower edges of the blade.
The blade is made from stainless steel, measuring 1.0 x 45 mm, and has a fibreglass-framed ABS plastic stock, with an 18 mm wide working surface.
The graduations are deep etched, and highly resistant to wear.

Specification:

Size: 200mm.

Size: 150mm (6in).

Size: 225mm (9in).

Length: 150mm (6in).

Size: 225mm (9in).