×

:

Not a valid Time
This is a required field.
per page

7 Items

Set Descending Direction
  1. HULTAFORS 108/15 WRECKING BAR 380MM (15IN)

    £14.18 Per Each

    The Hulfafors 108 Wrecking Bar is a small, versatile steel wrecking bar that can be used for pulling out nails and for breaking, scraping and lifting. It has three different functions for pulling out nails and its wide, ground contact surfaces and thin ends make it easy to use in narrow spaces and reduce the risk of leaving marks.

    Length: 380mm (15in).
    Weight: 650g.

    Delivery: UNABLE TO PROVIDE ETA
  2. HULTAFORS 108 MINI WRECKING BAR 190MM (7.5IN)

    £7.36 Per Each

    The Hultafors 108 Mini Wrecking Bar can be used to pull small nails, strips of wood, or open cans. It has three different functions for pulling out nails and the thin contact surfaces make it easy to use in narrow spaces.

    Length: 190mm (7.1/2in).
    Weight: 77g.

    Delivery: ETA FOR DELIVERY 3 - 5 DAYS
  3. HULTAFORS 207 STEEL PINCH BAR 400MM (16IN)

    £19.16 Per Each

    1 x Hultafors 207 Steel Pinch Bar 400mm (16in)

    Delivery: ETA FOR DELIVERY 3 - 5 DAYS
  4. HULTAFORS 207 STEEL PINCH BAR 500MM (20IN)

    £23.74 Per Each

    1 x Hultafors 207 Steel Pinch Bar 500mm (20in)

    Delivery: ETA FOR DELIVERY 3 - 5 DAYS
  5. HULTAFORS 207 STEEL PINCH BAR 600MM (24IN)

    £28.30 Per Each

    1 x Hultafors 207 Steel Pinch Bar 600mm (24in)

    Delivery: ETA FOR DELIVERY 3 - 5 DAYS
  6. HULTAFORS 209 SB ADJUSTABLE WRECKING BAR 640MM (25IN)

    £140.88 Per Each

    The Hultafors 209 SB Adjustable Wrecking Bar is manufactured in high quality steel with ergonomic rubber-clad handle. It's articulated claw is adjustable to nine different positions. With wide, ground contact surfaces and thin ends make it easy to use and reduce the risk of leaving marks. The claw is optimized for pulling out nails. The curved section at the chisel makes space for the hand and minimizes the risk of crushing damage.

    Delivery: ETA FOR DELIVERY 3 - 5 DAYS
  7. HULTAFORS F430 ALUMINIUM WRECKING BAR 430MM (16.9IN)

    £47.86 Per Each

    The Hultafors F430 Wrecking Bar is manufactured from aluminium with a cone-shaped point. Used when aligning flanges with bolt holes and for bending copper pipes with care. The bar is inserted in the pipe which is then heated up and bent to shape. This prevents damage to the actual pipe end. Very common when fitting car body components. Aluminium is easier and more comfortable to work with, does not rust and can handle the cold better.

    Delivery: ETA FOR DELIVERY 3 - 5 DAYS
per page

7 Items

Set Descending Direction